FujiFilm FN-PS551 Service Manual page 288

Maintenance 9. Setting the Control Unit (PC) to Use PEI01A Board
(15) Click the [Save] in the [File] menu.
→ The update confirmation screen for the ICU system configuration appears.
(16) Click [OK].
→ Returns to the [ISA Configuration Utility] window.
(17) Click the [Exit] in the [File] menu.
→ The ISA Configuration Utility is completed, and "C:\ICU>" appears.
(18) Remove the disk from the floppy disk drive, and switch off the power to the
control unit and monitor.
(19) Reinstall the PEI or DXA boards in the control unit.
006-251-05
05.30.2001 FM3069
Maintenance-259
FN-PS551 Service Manual Maintenance-259