Switching Commands; Introduction - Allied Telesis IE220 Series Manual

15

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
switching.
For more information, see the
Guide.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50644-01 Rev B
"backpressure" on page 511
"clear loop-protection
"clear loop-protection
"clear mac address-table
"clear mac address-table
"clear port counter" on page 518
"clear port-security intrusion" on page 519
"debug loopprot" on page 521
"debug platform packet" on page 522
"duplex" on page 524
"flowcontrol (switch port)" on page 525
"linkflap action" on page 527
"loop-protection loop-detect" on page 528
"loop-protection action" on page 530
"loop-protection action-delay-time" on page 531
"loop-protection timeout" on page 532
"mac address-table acquire" on page 533
"mac address-table ageing-time" on page 534
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Switching
Commands
Switching Feature Overview and Configuration
action" on page 513
counters" on page 514
dynamic" on page 515
static" on page 517
509