Switching Commands; Introduction; Chapter 15: Switching Commands - Allied Telesis x510-28GTX Command Reference Manual

15

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
switching.
For more information, see the
Guide.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50170-01 Rev B
"backpressure" on page 502
"clear loop-protection
"clear mac address-table
"clear mac address-table
"clear port counter" on page 508
"clear port-security intrusion" on page 509
"debug loopprot" on page 512
"debug platform packet" on page 513
"duplex" on page 515
"flowcontrol (switch port)" on page 517
"linkflap action" on page 519
"loop-protection loop-detect" on page 520
"loop-protection action" on page 521
"loop-protection action-delay-time" on page 522
"loop-protection timeout" on page 523
"mac address-table acquire" on page 524
"mac address-table ageing-time" on page 525
"mac address-table logging" on page 526
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Switching
Commands
Switching Feature Overview and Configuration
counters" on page 504
dynamic" on page 505
static" on page 507
500