Bridging - Digi IX20W-PR User Manual

Interfaces

Bridging

Bridging is a mechanism to create a single network consisting of multiple devices, such as Ethernet
devices and wireless access points. You can also use bridging to create a Vitural LAN switchport
bridge. See Create a VLAN using switchport mode
VLANs.
By default, the IX20 has the following preconfigured bridges:
Interface
type
Bridges (Wi-Fi
model only)
Interface type Preconfigured interfaces
You can modify configuration settings for the existing bridge, and you can create new bridges.
This section contains the following topics:
Edit the preconfigured ETH2 bridge
Configure a bridge
IX20 User Guide
Preconfigured interfaces
Bridge: LAN
n
for more information about switchport bridging for
Devices
Ethernet:
n
ETH2
Wi-Fi access
n
point: Digi
AP
Devices
Bridging
Default
configuration
Enabled
n
Used by the
n
ETH1 interface
Default
configuration
233
236
232