Debug Bridge - ADTRAN 1000R Series Command Reference Manual

Command Reference Guide Enable Mode Command Set

debug bridge

Use the debug bridge command to display messages associated with bridge events. Debug messages are
displayed (real time) to the terminal (or Telnet) screen. Use the no form of this command to disable debug
messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series
units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example activates bridge debug messages:
>enable
#debug bridge
61200510L1-35E Copyright © 2005 ADTRAN 99