ADTRAN 1000R Series Command Reference Manual page 528

Command Reference Guide
thresholds [BES | CSS | DM | ES | LCV | LES | PCV | SEFS | SES | UAS]
[15Min | 24Hr] <threshold count>
Use the thresholds command to specify DS1 performance counter thresholds. Use the no form of this
command to return to default settings.
Threshold settings are applied to ALL DS1s.
Syntax Description
BES
CSS
DM
ES
LCV
LES
PCV
SEFS
SES
UAS
15Min
24Hr
<threshold>
Default Values
The default values for this command are as follows:
thresholds BES 15Min 10
thresholds BES 24Hr 100
thresholds CSS 15Min 1
thresholds CSS 24Hr 4
thresholds DM 15Min 1
thresholds DM 24Hr 4
thresholds ES 15Min 65
thresholds ES 24Hr 648
thresholds LCV 15Min 13340
thresholds LCV 24Hr 133400
thresholds LES 15Min 65
thresholds LES 24Hr 648
thresholds PCV 15Min 72
thresholds PCV 24Hr 691
61200510L1-35E
Specifies the bursty errored seconds threshold.
Specifies the controlled slip seconds threshold.
Specifies the degraded minutes threshold.
Specifies the errored seconds threshold.
Specifies the line code violations threshold.
Specifies the line errored seconds threshold.
Specifies the path coding violations threshold.
Specifies the severely errored framing seconds threshold.
Specifies the severely errored seconds threshold.
Specifies the unavailable seconds threshold.
Specifies that the threshold you are setting is for the counter's 15 minute statistics.
Specifies that the threshold you are setting is for the counter's 24 hour statistics.
Specifies the maximum occurrences allowed for this error type. Once a threshold
is exceeded, an event is sent to the console specifying the appropriate counter.
Additionally, if SNMP traps are enabled, the unit will send a trap with the same
information as the console event.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
528