ADTRAN 1000R Series Command Reference Manual page 482

Command Reference Guide
port-auth max-req <number>
Use the port-auth max-req command to specify the maximum number of identity requests the
authenticator will transmit before restarting the authentication process.
Syntax Description
<number>
Default Values
By default, the maximum number of authentication requests is set at 2.
Applicable Platforms
This command applies to the NetVanta 1000 and 1000R Series units.
Command History
Release 10.1
Usage Examples
The following example sets the maximum number of authentication requests at 4:
(config)#port-auth max-req 4
61200510L1-35E
Specifies the maximum number of authentication requests.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
482