ADTRAN 1000R Series Command Reference Manual page 530

Command Reference Guide
username <username> password <password>
Use this command to configure the username and password to use for all protocols requiring a
username-based authentication system including FTP server authentication, line (login local-user list), and
HTTP access.
Syntax Description
<username>
<password>
Default Values
By default, there is no established username and password.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1
Functional Notes
All users defined using the username/password command are valid for access to the unit using the login
local-userlist command.
Usage Examples
The following example creates a username of ADTRAN with password ADTRAN:
(config)#username ADTRAN password ADTRAN
61200510L1-35E
Specifies a username using an alphanumerical string up to 30 characters in length
(the username is case-sensitive).
Specifies a password using an alphanumerical string up to 30 characters in length
(the password is case-sensitive).
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
530