Show Channel-Group - ADTRAN 1000R Series Command Reference Manual

Command Reference Guide

show channel-group

Use the show channel-group command to display detailed information regarding port aggregation of a
specified channel group (i.e., channel groups and their associated ports).
Variations of this command include the following:
show channel-group port-channel load-balance
show channel-group summary
show channel-group <channel group #> summary
Syntax Description
port-channel load-balance
summary
<channel group #>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 5.1
Usage Examples
The following is a sample from the show channel-group command:
>enable
#show channel-group summary
Channel Group Port channel
-------------------- -----------------
1
2
61200510L1-35E
Displays the current load-balance scheme.
Summarizes the state of all channel groups or of a specific channel group (if
specified by the <channel group #> argument).
Specifies the channel group using the channel group ID (16).
Command was introduced.
Associated Ports
-----------------------
1 eth 0/2 eth 0/3
2 eth 0/5 eth 0/6 eth 0/7
Copyright © 2005 ADTRAN
Enable Mode Command Set
166