ADTRAN 1000R Series Command Reference Manual page 52

Command Reference Guide
clear host [ * | <hostname>]
Use the clear host command to clear a hostname when using the Domain Naming System (DNS) proxy.
Syntax Description
*
<hostname>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 10.1
Usage Examples
The following example clears all dynamic hostnames:
>enable
#clear host *
61200510L1-35E
Clears all dynamic hosts.
Clears a specific host name.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
52