Show Startup-Config Checksum - ADTRAN 1000R Series Command Reference Manual

Command Reference Guide Enable Mode Command Set

show startup-config checksum

Use the show startup-config checksum command to display the Message Digest 5 (MD5) checksum of
the unit's startup configuration.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 8.1 Command was introduced.
Functional Notes
This command is used in conjunction with the show running-config checksum command to determine
whether the configuration has changed since the last time it was saved.
Usage Examples
The following example displays the MD5 checksum of the unit's startup configuration:
>enable
#show startup-config checksum
10404D5DAB3FE35E307B6A79AC6AC8C0
#
#show running-config checksum
10404D5DAB3FE35E307B6A79AC6AC8C0
#
61200510L1-35E Copyright © 2005 ADTRAN 305