ADTRAN 1000R Series Command Reference Manual page 568

Command Reference Guide
bonding txcid-timer <seconds>
Use the bonding txcid-timer command to specify the value (in seconds) for the bearer channel
(B-channel) negotiation timeout. Use the no form of this command to return to the default value.
Syntax Description
<seconds>
Default Values
By default, the bonding txcid-timer value is 5 seconds.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, and 4000 Series units.
Command History
Release 1.1
Functional Notes
Specifies the length of time both endpoints attempt to negotiate an agreeable value for bearer channels
and channel capacities before deciding the bonding call has failed.
Usage Examples
The following example defines a bonding txcid-timer value of 8 seconds:
(config)#interface bri 1/2
(config-bri 1/2)#bonding txcid-timer 8
61200510L1-35E
Specifies the number of seconds the endpoint allots for negotiating data rates and
channel capacities before considering the bonding negotiation a failure.
Command was introduced.
Copyright © 2005 ADTRAN
BRI Interface Configuration Command set
568