ADTRAN 1000R Series Command Reference Manual page 316

Command Reference Guide
telnet <address>
Use the telnet command to open a Telnet session (through the AOS) to another system on the network.
Syntax Description
<address>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1
Usage Examples
The following example opens a Telnet session with a remote system (10.200.4.15):
>enable
#telnet 10.200.4.15
User Access Login:
Password:
61200510L1-35E
Specifies the IP address of the remote system.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
316