ADTRAN 1000R Series Command Reference Manual page 428

Command Reference Guide Global Configuration Mode Command Set
ip ftp agent
Use the ip ftp agent command to enable the file transfer protocol (FTP) agent.
Syntax Description
No subcommands.
Default Values
By default, the FTP agent is enabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 4.1 Command was introduced.
Usage Examples
The following example enables the IP FTP agent:
(config)#ip ftp agent
61200510L1-35E Copyright © 2005 ADTRAN 428