Command Reference Guide
Enable Mode Command Set
exception report generate
Use the exception report generate command to immediately generate an exception report.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 10.1
Command was introduced.
Usage Examples
The following example immediately generates an exception report:
>enable
#exception report generate
61200510L1-35E
Copyright © 2005 ADTRAN
152