ADTRAN 1000R Series Command Reference Manual page 297

Command Reference Guide
Usage Examples
The following is sample output using the show spanning-tree realtime command.
>enable
#show spanning-tree realtime
-------------------------------------------------------------------------------------------------
STP 0
Vlan 1
Spanning Tree enabled protocol ieee 802.1w (Rapid Spanning-Tree)
Root ID Priority
Address
Cost
Port
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority
Address
Aging Time 300
Interface Role
---------------- ---- --- --------- -------- --------------------------------------------------------
giga-eth 0/1 Root
giga-eth 0/5 Altn
-----------------------------------------------------------------------------------------------------
Exit - 'Ctrl-C', Freeze - 'f', Resume - 'r'
61200510L1-35E
8894
00:a0:c8:00:f5:52
46
1 (giga-eth 0/1)
32768
00:a0:c8:02:f6:6b
Sts Cost Prio.Nbr Type
FWD 19 128.1
BLK 19 128.5
Copyright © 2005 ADTRAN
Enable Mode Command Set
P2p
P2p
297