Bridge <Group#> Protocol Ieee - ADTRAN 1000R Series Command Reference Manual

Command Reference Guide
bridge <group#> protocol ieee
The bridge protocol ieee command configures a bridge group for the IEEE Spanning-Tree Protocol. Use
the no form of this command (with the appropriate arguments) to delete this setting.
Syntax Description
<group#>
ieee
Default Values
By default, all configured bridge interfaces implement ieee spanning-tree protocol.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series
units.
Command History
Release 1.1
Usage Examples
The following example deletes the bridge protocol setting for bridge-group 17:
(config)#no bridge 17 protocol ieee
61200510L1-35E
Specifies a bridge group number (range: 1 to 255).
Specifies IEEE 802.1 Ethernet spanning-tree protocol.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
349