ADTRAN 1000R Series Command Reference Manual page 121

Command Reference Guide
debug ip http [verbose]
Use the debug ip http command to activate debug messages associated with HyperText Transfer Protocol
(HTTP) operation in the AOS. Debug messages are displayed (real time) to the terminal (or Telnet) screen.
Use the no form of this command to disable the debug messages.
Syntax Description
verbose
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 and Total Access 900 Series units.
Command History
Release 6.1
Usage Examples
The following example activates debug messages associated with HTTP activity:
>enable
#debug ip http
61200510L1-35E
Activates detailed debug messages for HTTP operation.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
121