ADTRAN 1000R Series Command Reference Manual page 555

Command Reference Guide
accounting commands [<level> l <name> l default]
Use the accounting commands command to assign AAA accounting methods to lines. You must first turn
AAA on for this command to become available.
Syntax Description
<level>
<name>
default
Default Values
The default for this command is off.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1
Usage Examples
The following example applies the default accounting method to Telnet session 1:
(config)#aaa on
(config)#line telnet 1
(config-telnet1)#accounting commands 1 default
61200510L1-35E
Specifies a command level (1 or 15).
Applies a named accounting method to this line.
Applies the default accounting method to a line.
Command was introduced.
Copyright © 2005 ADTRAN
Line (Telnet) Interface Config Command Set
555