Debug System - ADTRAN 1000R Series Command Reference Manual

Command Reference Guide Enable Mode Command Set

debug system

Use the debug system command to enable debug messages associated with system events (i.e., login,
logouts, etc.). Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no form
of this command to disable the debug messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 3.1 Command was introduced.
Usage Examples
The following example activates debug messages associated with system information:
>enable
#debug system
61200510L1-35E Copyright © 2005 ADTRAN 143