ADTRAN 1000R Series Command Reference Manual page 682

Command Reference Guide
serial-mode [eia530 | v35 | x21]
Use the serial-mode command to specify the electrical mode for the interface. Use the no form of this
command to return to the default value.
Syntax Description
eia530
v35
x21
Default Values
By default, the serial interface is configured for a V.35 adapter cable.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, and 4000 Series and Total Access 900 Series units.
Command History
Release 1.1
Functional Notes
The pinouts for each of the available interfaces can be found in the Hardware Configuration Guide located
on the ADTRAN OS Documentation CD (provided in shipment).
Usage Examples
The following example configures the serial interface to work with the X.21 adapter cable:
(config)#interface serial 1/1
(config-ser 1/1)#serial-mode X21
61200510L1-35E
Configures the interface for use with the EIA 530 adapter cable (P/N 1200883L1).
Configures the interface for use with the V.35 adapter cable (P/N 1200873L1).
Configures the interface for use with the X.21 adapter cable (P/N 1200874L1).
Command was introduced.
Copyright © 2005 ADTRAN
Serial Interface Configuration Command Set
682