ADTRAN 1000R Series Command Reference Manual page 360

Command Reference Guide
crypto ca certificate chain <name>
Use the crypto ca certificate chain command to enter the Certificate Configuration for the specified CA.
Refer to Certificate Configuration Command Set
Syntax Description
<name>
Default Values
No defaults necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1
Functional Notes
Typically used only in the running-config and startup-config to restore certificates.
Usage Examples
The following example enters the Certificate Configuration mode for the CA profile MyProfile:
(config)#crypto ca certificate chain MyProfile
61200510L1-35E
Specifies a CA profile using an alphanumeric string (up to 32 characters).
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
on page 1226 for more information.
360