Command Reference Guide
show ip ospf neighbor <interface> <neighbor id> [detail]
Use the show ip ospf neighbor command to display open shortest path first (OSPF) neighbor information
for a specific interface.
Syntax Description
<interface>
<neighbor id>
detail
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 3.1
Release 9.1
Usage Examples
The following example shows detailed information on the OSPF neighbors:
>enable
#show ip ospf neighbor
61200510L1-35E
Optional. Displays the interface type. Type show ip ospf neighbor ? for a complete
list of applicable interfaces.
Optional. Specifies a specific neighbor's router ID.
Optional. Displays detailed information on all neighbors.
Command was introduced.
Command was expanded to include HDLC and tunnel interfaces.
Copyright © 2005 ADTRAN
Enable Mode Command Set
231