ADTRAN 1000R Series Command Reference Manual page 264

Command Reference Guide
show port-auth [detailed | statistics | summary] [interface
<interface id>]
Use the show port-auth command to view port authentication information.
Syntax Description
detailed
statistics
summary
interface <interface id>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000 and 1000R Series units.
Command History
Release 10.1
Usage Examples
The following example displays the port authentication information:
>enable
#show port-auth
Global Port-Authentication Parameters:
re-authentication enabled:
reauth-period:
quiet-period:
tx-period:
supp-timeout:
server-timeout:
reauth-max:
max-req:
61200510L1-35E
Displays detailed port authentication information.
Displays port authentication statistics.
Displays a summary of port authentication settings.
Displays port authentication information for the specified interface. Interface ID
consists of the interface type and ID number. Type show port-auth interface ?
for a list of valid interfaces.
Command was introduced.
False
3600
60
30
30
30
2
2
Copyright © 2005 ADTRAN
Enable Mode Command Set
264