ADTRAN 1000R Series Command Reference Manual page 881

Command Reference Guide
dial-backup maximum-retry <attempts>
Use the dial-backup maximum-retry command to select the number of calls the router will make when
attempting to backup a link. Use the no form of this command to return to the default state. For more
detailed information on Frame Relay dial-backup functionality, refer to the Functional Notes and
Technology Review sections of the command dial-backup call-mode [answer | answer-always | originate |
originate-answer | originate-answer-always]
Syntax Description
<attempts>
Default Values
By default, dial-backup maximum-retry is set to 0 attempts.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Usage Examples
The following example configures the AOS to retry a dial-backup call four times before considering backup
operation not available:
(config)#interface frame-relay 1.16
(config-fr 1.16)#dial-backup maximum-retry 4
61200510L1-35E
on page
Selects the number of call retries that will be made after a link failure (valid range:
0 to 15).
Setting this value to 0 will allow unlimited retries during the time the network is
failed.
Command was introduced.
Copyright © 2005 ADTRAN
Frame Relay Sub-Interface Config Command Set
876.
881