Show Dial-Backup Interfaces - ADTRAN 1000R Series Command Reference Manual

Command Reference Guide

show dial-backup interfaces

Use the show dial-backup interfaces command to display all configured dial-backup interfaces and the
associated parameters for each.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Release 5.1
Usage Examples
The following example enters the Enable mode and uses the show command to display dial-backup
interface information:
>enable
#show dial-backup interfaces
Dial-backup interfaces...
fr 1.16 backup interface:
Backup state: idle
Backup protocol: PPP
Call mode: originate
Auto-backup: enabled
Auto-restore: enabled
Priority: 50
Backup delay: 10 seconds
Restore delay: 10 seconds
Connect timeout: 60 seconds
Redial retries: unlimited
Redial delay: 10 seconds
Backup enabled all day on the following days:
Sunday Monday Tuesday Wednesday Thursday Friday Saturday
61200510L1-35E
Command was introduced.
Command was expanded to include PPP dial backup.
Copyright © 2005 ADTRAN
Enable Mode Command Set
180