ADTRAN 1000R Series Command Reference Manual page 63

Command Reference Guide
clear ip prefix-list <listname>
Use the clear ip prefix-list command to clear the IP prefix list hit count shown in the show ip prefix-list
detail command output. Refer to show ip prefix-list [detail | summary] <listname>
information.
Syntax Description
<listname>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 8.1
Usage Examples
The following example clears the hit count statistics for prefix list test:
>enable
#clear ip prefix-list test
61200510L1-35E
Specifies hit count statistics of the IP prefix list to clear.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
on page 237 for more
63