ADTRAN 1000R Series Command Reference Manual page 885

Command Reference Guide
dial-backup redial-delay <seconds>
Use the dial-backup redial-delay command to configure the delay after an unsuccessful call until the call
will be re-tried. For more detailed information on Frame Relay dial-backup functionality, refer to the
Functional Notes and Technology Review sections of the command dial-backup call-mode [answer |
answer-always | originate | originate-answer | originate-answer-always]
Syntax Description
<seconds>
Default Values
By default, dial-backup redial-delay is set to 10 seconds.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Usage Examples
The following example configures a redial delay of 25 seconds on this endpoint:
(config)#interface frame-relay 1.16
(config-fr 1.16)#dial-backup redial-delay 25
61200510L1-35E
Specifies the delay in seconds between attempting to re-dial a failed backup
attempt. Range: 10 to 3600.
Command was introduced.
Copyright © 2005 ADTRAN
Frame Relay Sub-Interface Config Command Set
on page 876.
885