ADTRAN 1000R Series Command Reference Manual page 569

Command Reference Guide
bonding txdeq-timer <seconds>
Use the bonding txdeq-timer command to specify the value (in seconds) for the network delay
equalization timeout. Use the no form of this command to return to the default value.
Syntax Description
<seconds>
Default Values
By default, the bonding txdeq-timer value is 50 seconds.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, and 4000 Series units.
Command History
Release 1.1
Functional Notes
Specifies the length of time both endpoints allot to attempt to equalize the network delay between the
bearer channels before deciding the bonding call has failed.
Usage Examples
The following example defines a bonding txdeq-timer value of 80 seconds:
(config)#interface bri 1/2
(config-bri 1/2)#bonding txdeq-timer 80
61200510L1-35E
Specifies the number of seconds the endpoint allots for attempting to equalize the
network delay between bearer channels before considering the bonding
negotiation a failure.
Command was introduced.
Copyright © 2005 ADTRAN
BRI Interface Configuration Command set
569