ADTRAN 1000R Series Command Reference Manual page 192

Command Reference Guide
show gvrp statistics interface <interface>
Use the show gvrp statistics interface command to show statistics related to GARP VLAN Registration
Protocol (GVRP).
Syntax Description
<interface>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 8.1
Usage Examples
The following example displays statistics related to GVRP for Ethernet interface 0/24:
>enable
#show gvrp statistics interface ethernet 0/24
Name: eth 0/24
Join Empty Received: 0
Join In Received: 272
Empty Received: 30
Leave Empty Received: 0
Leave In Received: 0
Leave All Received: 28
Join Empty Transmitted: 0
Join In Transmitted: 286
Empty Transmitted: 28
Leave Empty Transmitted: 0
Leave In Transmitted: 0
Leave All Transmitted: 115
#
61200510L1-35E
Shows the information for the specified interface. Type show gvrp statistics
interface ? for a complete list of applicable interfaces.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
192