Command Reference Guide
reload [cancel | in <delay>]
Use the reload command to preform a manual reload of the AOS.
Performing an AOS reload disrupts data traffic.
Syntax Description
cancel
in
<delay>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1
Usage Examples
The following example reloads the AOS software in 3 hours and 27 minutes:
>enable
#reload in 03:27
The following example reloads the AOS software in 15 minutes:
>enable
#reload in 15
The following example terminates a pending reload command:
>enable
#reload cancel
61200510L1-35E
Optional. Deactivates a pending reload command.
Optional. Specifies a delay period the AOS will wait before reloading.
Specifies the delay period in minutes (mmm) or hours and minutes (hh:mm).
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
157