Ip Name-Server <Server-Address - ADTRAN 1000R Series Command Reference Manual

Command Reference Guide
ip name-server <server-address1-6>
Use the ip name-server command to designate one or more name servers to use for name-to-address
resolution. Use the no form of this command to remove any addresses previously specified.
Syntax Description
<server-address1-6>
Default Values
By default, no name servers are specified.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 3.1
Usage Examples
The following example specifies host 172.34.1.111 as the primary name server and host 172.34.1.2 as the
secondary server:
(config)#ip name-server 172.341.1.111 172.34.1.2
This command will be reflected in the configuration file as follows:
ip name-server 172.34.1.111 172.34.1.2
61200510L1-35E
Specifies up to six name-server addresses.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
436