ADTRAN 1000R Series Command Reference Manual page 842

Command Reference Guide
username <username> password <password>
Configures the username and password of the peer to use for demand authentication.
Syntax Description
<username>
<password>
Default Values
By default, there is no established username and password.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Release 11.1
Functional Notes
PAP uses this entry to check received information from the peer. CHAP uses this entry to check the
received peer hostname and a common password.
Usage Examples
The following example creates a username of ADTRAN with password ADTRAN for the demand link
labeled 5:
(config)#interface demand 5
(config-demand 5)#username ADTRAN password ADTRAN
61200510L1-35E
Specifies a username by alphanumerical string up to 30 characters in length (the
username is case-sensitive).
Specifies a password by alphanumerical string up to 30 characters in length (the
password is case-sensitive).
Command was introduced.
Command expanded to include the demand interface.
Copyright © 2005 ADTRAN
Demand Interface Configuration Command Set
842