ADTRAN 1000R Series Command Reference Manual page 531

Command Reference Guide
vlan <vlan id>
Use the vlan command to enter the VLAN configuration mode. Refer to the section for more information.
Syntax Description
<vlan id>
Default Values
No defaults necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.
Command History
Release 5.1
Usage Examples
The following example enters the VLAN configuration mode for VLAN 1:
(config)#vlan 1
(config-vlan 1)#
61200510L1-35E
Specifies a valid VLAN ID (1 to 4094).
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
531