Boot Config [Cflash | Flash] <Filename> [Cflash | Flash] <Backup Filename - ADTRAN 1000R Series Command Reference Manual

Command Reference Guide
boot config [cflash | flash] <filename> [cflash | flash] <backup filename>
Use the boot config command to modify system boot parameters.
Syntax Description
cflash
flash
<filename>
<backup filename>
Default Values
No default is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 2000, 3000, 4000 Series units.
Command History
Release 8.1
Usage Examples
The following example specifies the file myimage.biz, stored in flash memory, as the startup image:
(config)#boot system flash myimage.biz
61200510L1-35E
Specifies primary/backup configuration file located in CompactFlash memory.
Specifies primary/backup configuration file located in flash memory.
Specifies the filename of the configuration file (filenames are case-sensitive).
Specifies a name for the backup configuration file.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
347