Ftp Authentication <Listname - ADTRAN 1000R Series Command Reference Manual

Command Reference Guide
ftp authentication <listname>
Use the ftp authentication command to attach AAA login authentication lists to the FTP server (refer to
aaa authorization commands <level> [<listname> | default] [group <groupname> | group tacacs+ |
if-authenticated | none]
has been activated with the aaa on command.
Syntax Description
<listname>
Default Values
There is no default configuration for the list. If AAA is turned on but no ftp authentication list has been
assigned, FTP denies all login attempts.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 5.1
Usage Examples
The following example attaches the authentication list, MyList, to the FTP server:
(config)#ftp authentication MyList
The following example specifies that the AOS use the default AAA login list for FTP authentication:
(config)#ftp authentication default
61200510L1-35E
on page 336 for more information). This list is only used if the AAA subsystem
Specifies the named list created with the aaa authentication login command.
Enter default to use the AAA default login list.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
386