Show Mac Address-Table Count - ADTRAN 1000R Series Command Reference Manual

Command Reference Guide Enable Mode Command Set

show mac address-table count

Use the show mac address-table count command to display information regarding the number of medium
access control (MAC) addresses in use (both static and dynamic).
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following is a sample from the show mac address-table count command:
>enable
#show mac address-table count
Mac Table Entries:
--------------------------
Dynamic Address Count: 19
Static Address Count: 3
Total Mac Addresses: 23
Total Mac Address Space Available: 8169
61200510L1-35E Copyright © 2005 ADTRAN 253