ADTRAN 1000R Series Command Reference Manual page 318

Command Reference Guide Enable Mode Command Set
terminal length <text>
The terminal length command sets the number of rows (lines) for a terminal session. Use the no form of
this command to return to the default value. This command is only valid for the current session and returns
to the default (24 rows) when the session closes.
Syntax Description
No subcommands.
Default Values
The default setting for this command is 24 rows.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 6.1 Command was introduced.
Usage Examples
The following example sets the number of rows to 30.
>enable
#terminal length 30
61200510L1-35E Copyright © 2005 ADTRAN 318