ADTRAN 1000R Series Command Reference Manual page 470

Command Reference Guide Global Configuration Mode Command Set
logging forwarding on
Use the logging forwarding on command to enable the AOS syslog event feature. Use the logging
forwarding priority-level command to specify the event matching the criteria used by the AOS to
determine whether a message should be forwarded to the syslog server. Refer to logging forwarding
priority-level [error | fatal | info | notice | warning] on page 471 for related information. Use the no form
of this command to disable the syslog event feature.
Syntax Description
No subcommands.
Default Values
By default, syslog event notification is disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example enables the AOS syslog event feature:
(config)#logging forwarding on
61200510L1-35E Copyright © 2005 ADTRAN 470