ADTRAN 1000R Series Command Reference Manual page 477

Command Reference Guide
modem countrycode [<countrycode>]
Use the modem countrycode command to specify the modem configuration for the applicable country.
Syntax Description
<countrycode>
Default Values
By default, modem countrycode is set to USA/Canada.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, and 4000 Series units.
Command History
Release 10.1
Functional Notes
The following country codes are available for modem configuration:
Algeria
Argentina
Australia
Austria
Bahrain
Belgium
Bolivia
Brazil
Chile
China
Colombia
Costa_Rica
Cyprus
Czechoslovakia
Denmark
Ecuador
Egypt
Finland
France
Germany
Greece
61200510L1-35E
Specifies the modem configuration for the applicable country.
Command was introduced.
- Algeria Modem configuration
- Argentina Modem configuration
- Australia Modem configuration
- Austria Modem configuration
- Bahrain Modem configuration
- Belgium Modem configuration
- Bolivia Modem configuration
- Brazil Modem configuration
- Chile Modem configuration
- China Modem configuration
- Colombia Modem configuration
- Costa_Rica Modem configuration
- Cyprus Modem configuration
- Czechoslovakia Modem configuration
- Denmark Modem configuration
- Ecuador Modem configuration
- Egypt Modem configuration
- Finland Modem configuration
- France Modem configuration
- Germany Modem configuration
- Greece Modem configuration
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
477