ADTRAN 1000R Series Command Reference Manual page 59

Command Reference Guide
clear ip ospf [process | redistribution]
Use the clear ip ospf command to reset open shortest path first (OSPF) information.
Syntax Description
process
redistribution
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 11.1
Usage Examples
The following example resets the OSPF process:
>enable
#clear ip ospf process
61200510L1-35E
Restarts the OSPF process.
Refreshes routes redistributed over OSPF.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
59