Show Garp Timer - ADTRAN 1000R Series Command Reference Manual

Command Reference Guide

show garp timer

Use the show garp timer command to see the current configured Generic Attribute Registration Protocol
(GARP) application timer values.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 8.1
Usage Examples
The following example displays the current configured GARP application timer values:
>enable
#show garp timer
Timer
--------
Join
Leave
LeaveAll
61200510L1-35E
Command was introduced.
Timer Value (milliseconds)
--------------------------
200
600
10000
Copyright © 2005 ADTRAN
Enable Mode Command Set
190