ADTRAN 1000R Series Command Reference Manual page 736

Command Reference Guide
dial-backup priority <value>
Use the dial-backup priority command to select the backup priority for this interface. This allows the user
to establish the highest priority backup link and ensure that link will override backups attempted by lower
priority links. Use the no form of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, the dial-backup priority is set to 50.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, and 4000 Series units.
Command History
Release 1.1
Release 8.1
Usage Examples
The following example assigns the highest priority to this endpoint:
(config)#interface atm 1.1
(config-atm 1.1)#dial-backup priority 100
61200510L1-35E
Sets the relative priority to this link (valid range: 0 to 100). A value of 100
designates the highest priority.
Command was introduced.
ATM sub-interface was added.
Copyright © 2005 ADTRAN
ATM Sub-Interface Config Command Set
736