ADTRAN 1000R Series Command Reference Manual page 248

Command Reference Guide
show mac address-table
Use the show mac address-table command to display all static and dynamic entries in the medium access
control (MAC) address table for all virtual local area networks (VLANs) and physical interfaces.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.
Command History
Release 5.1
Usage Examples
The following is sample output from the show mac address-table command:
>enable
#show mac address-table
Mac Address Table
------------------------------------------
Vlan
1
1
2
2
2
2
2
2
2
2
2
2
2
61200510L1-35E
Command was introduced.
Mac Address
aa:bb:ee:d1:c2:33
00:00:00:00:00:00
00:90:2b:7d:30:00
00:a0:c8:00:8e:a6
00:a0:c8:00:8f:ba
00:a0:c8:00:8f:73
00:a0:c8:00:00:00
00:a0:c8:01:ff:02
00:a0:c8:01:09:d3
00:a0:c8:01:13:34
00:a0:c8:01:14:4a
00:a0:c8:03:95:4b
00:a0:c8:05:00:89
Copyright © 2005 ADTRAN
Enable Mode Command Set
Type
STATIC
STATIC
DYNAMIC
DYNAMIC
DYNAMIC
DYNAMIC
DYNAMIC
DYNAMIC
DYNAMIC
DYNAMIC
DYNAMIC
DYNAMIC
DYNAMIC
Ports
eth 0/18
CPU
eth 0/1
eth 0/1
eth 0/1
eth 0/1
eth 0/1
eth 0/1
eth 0/1
eth 0/1
eth 0/1
eth 0/1
eth 0/1
248