ADTRAN 1000R Series Command Reference Manual page 900

Command Reference Guide
ip dhcp [release | renew]
Use the ip dhcp command to release or renew the DHCP IP address. This command is only applicable
when using DHCP for IP address assignment.
Syntax Description
release
renew
Default Values
No default values required for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 and Total Access 900 Series units.
Command History
Release 3.1
Usage Examples
The following example releases the IP DHCP address for the virtual interface:
(config)#interface frame-relay 1.16
(config-fr 1.16)#ip dhcp release
61200510L1-35E
Releases DHCP IP address.
Renews DHCP IP address.
Command was introduced.
Copyright © 2005 ADTRAN
Frame Relay Sub-Interface Config Command Set
900