ADTRAN 1000R Series Command Reference Manual page 490

Command Reference Guide Global Configuration Mode Command Set
qos queue-type strict-priority
Use the qos queue-type strict-priority command to enable queuing based strictly on the priority of each
queue.
Syntax Description
No subcommands.
Default Values
By default, the queue type is weighted round robin (WRR).
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example enables strict-priority queuing:
(config)#qos queue-type strict-priority
61200510L1-35E Copyright © 2005 ADTRAN 490