Command Reference Guide
copy flash <destination>
Use the copy flash command to copy a file located in flash memory to a specified destination.
Syntax Description
<destination>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1
Usage Examples
The following example copies the contents of the unit's flash memory to a TFTP server:
>enable
#copy flash tftp
61200510L1-35E
Specifies the destination of the copied file. Valid destinations include tftp and
xmodem.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
89