Command Reference Guide
Enable Mode Command Set
vlan database
Use the vlan database command to enter the VLAN Database Configuration mode. Refer to the section
VLAN Database Configuration Command Set
on page 1167
for more information.
Syntax Description
No subcommands.
Default Values
No defaults necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 5.1
Command was introduced.
Usage Examples
The following example enters the VLAN Configuration mode:
>enable
#vlan database
61200510L1-35E
Copyright © 2005 ADTRAN
321