ADTRAN 1000R Series Command Reference Manual page 315

Command Reference Guide
Usage Examples
The following is a sample show vlan output:
>enable
#show vlan
VLAN Name
-------------------- --------------------
1
Default
2 accounting
3 VLAN0003
VLAN Type
-------------------- ---------------
1
enet
2
enet
3
The following is an example of the show vlan name command that displays VLAN 2 (accounting VLAN)
information:
>enable
#show vlan name accounting
VLAN Name
-------------------- ----------------
2
accounting
VLAN
Type
--------------------
----------------
2
enet
61200510L1-35E
Status Ports
-------------- -----------
active eth 0/5, eth 0/6, eth 0/8, eth 0/13, eth 0/14, eth 0/15,
eth 0/16, eth 0/17, eth 0/18, eth 0/19, eth 0/20, eth 0/21,
eth 0/22, eth 0/23, eth 0/24, giga-eth 0/1, giga-eth 0/2
active eth 0/1, eth 0/2
active eth 0/3, eth 0/4, eth 0/7, eth 0/9, eth 0/10, eth 0/11,
eth 0/12
MTU
--------------
1500
1500
Status Ports
------------- ----------------
active eth 0/1, eth 0/2
MTU
-------------
1500
Copyright © 2005 ADTRAN
Enable Mode Command Set
315