Command Reference Guide
spanning-tree forward-time <seconds>
Use the spanning-tree forward-time command to specify the delay interval (in seconds) when forwarding
spanning-tree packets. Use the no form of this command to return to the default interval.
Syntax Description
<seconds>
Default Values
By default, the forwarding delay is set to 15 seconds.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1
Usage Examples
The following example sets the forwarding time to 18 seconds:
(config)#spanning-tree forward-time 18
61200510L1-35E
Specifies the forwarding delay interval in seconds (Range: 4 to 30).
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
519